Keep your tool organised and out of sight with this drawer unit.
Made of sturdy 12mm marine ply, the standard unit comes with lockable latches to the drawers and x4 adjustable half height dividers, and chequer plate angle to the front edge. The drawers have a load capacity of 80kgs.
The top fits snugly to the sides of your vehicle – no lost tools down the sides.
The internal dimensions of the drawers are: 277mm high x 518mm wide x 1136mm long.
The overall height of the unit is 392mm.
The unit comes with 2 x compartments to access the unused space behind the drawers. The access panel closest to the bulkhead measures 300mm x 588mm and accesses a compartment measuring 1587mm long x 360mm wide x 368mm high.
The second compartment has an access panel measuring 330mm x 488mm and the compartment measures 400mm long x 580mm wide x 368mm high.
For an additional cost, units can be ordered with a black laminate to the front, and/or a rubber matting finish to the top.
This unit is available for fitting at our premises near Hailsham in East Sussex, we do not deliver at this time.
If you have one of the vehicles listed above, we have units tailor-made for your vehicle. You can get these delivered to your door for easy self-assembly (they slot straight into your vehicle – trust us, it really is easy!), or you can visit our Hailsham showroom to get us to fit them for you for free.
Don’t have one of those vehicles? Then we’ll make a unit just for you! Check out our custom-made solutions.
Keep tools and equipment organised and out of sight of thieves.