Keep your tool organised and out of sight with this drawer unit.
Made of sturdy 12mm marine ply, the standard unit comes with lockable latches to the drawers and x4 adjustable half height dividers, and chequer plate angle to the front edge. The drawers have a load capacity of 80kgs.
Made of 12mm marine ply, the top of these drawers fit snugly to the sides of your vehicle – no lost tools down the sides.
Designed and manufactured in house, the internal dimensions of the drawers are: 288mm high x 518mm wide x 1136mm long. Each drawer comes with x2 half height dividers.
The unit comes with 2 x access panels to access the unused space behind the drawers. The dimensions of the access panels are: 450mm x 380mm and they both access the same open compartment.
The overall height of this storage system is 363mm.
The edge of the drawers is finished with an aluminium edge.
For an additional cost, units can be ordered with a black laminate to the front, and/or a rubber matting finish to the top.
FREE fitting service at our premises near Hailsham in East Sussex, these drawers are not available for shipping at this time.
If you have one of the vehicles listed above, we have units tailor-made for your vehicle. You can get these delivered to your door for easy self-assembly (they slot straight into your vehicle – trust us, it really is easy!), or you can visit our Hailsham showroom to get us to fit them for you for free.
Don’t have one of those vehicles? Then we’ll make a unit just for you! Check out our custom-made solutions.
Keep tools and equipment organised and out of sight of thieves.